The TOUR AD YSQ showcases
Graphite Design's Axial Composite Interlace (ACI) Technology. ACI
Technology debuted with the ultra-premium TOUR AD Quattrotech in
2007 and quickly dominated the JAPAN PGA TOUR. The YSQ features an
overall firmer bend profile based off the acclaimed YS-6+ shaft
with the supple smooth power for which TOUR AD is famous. This mid
launch design is desirable by the avid golfer in search of quality
engineering, performance, and reputation. The YSQ is available in 3
weight categories: 55, 65, and 75 grams for drivers and they can be
trimmed to Fairway Model lengths if preferred as there is a 4"
Parallel Tip Section. This is a true family of shafts meaning all
the weight categories have the same bend profile and MID KICK MID
LAUNCH design. The only difference among the shafts is the torque
gets higher as the weight gets lower.
|
Shaft Type
|
Flex
|
Weight
(gram)
|
Tip Dia
(inch)
|
Butt Dia
(inch)
|
Parallel Tip
Length(inch)
|
Torque
(degree)
|
Kick point
|
|
YSQ 65
|
R
|
67
|
.335"&.350"
|
.595"-.605"
|
4.0"
|
3.7
|
MID
|
|
YSQ 65
|
S
|
67
|
.335"&.350"
|
.595"-.605"
|
4.0"
|
3.7
|
MID
|
|
YSQ 65
|
X
|
67
|
.335"&.350"
|
.595"-.605"
|
4.0"
|
3.7
|
MID
|
Notes
- Graphite Design encourages
consulting a PGA Professional or qualified clubmaker on selecting
the best length shaft for your swing characteristics.
- Tip trimming is dependent on the
bore depth and intended results.
- Tip trimming will increase
frequency, tip stiffness and torque (amount of increase will vary
depending on model.
- Always leave at least .5" of
parallel tip section outside the hosel. For example: With a hosel
depth of 1.5" and parallel tip length of 4", the trim should not
exceed 2".
- Improper installation may affect
the intended performance of the shaft.
- Warranty is for material and
workmanship of products. Improper installation voids warranty of
product.
Pershing, YS+,
YSQ, Quattro Tech, Throttle
|
Types |
Products |
Through-
Bore |
Blind-Bore |
Std-Bore |
|
Driver |
Pershing 55, 65,
75
YS-5+, YS-6+, YS-7+
YSQ 55, 65, 75
Quattro Tech Md |
0.0" |
0.5" |
1.0" |
|
#3 Wood |
Pershing 55, 65,
75
YS-5+, YS-6+, YS-7+
YSQ 55, 65, 75
Quattro Tech Md |
0.5" |
1.0" |
1.5" |
|
#5 Wood |
Pershing 55, 65,
75
YS-5+, YS-6+, YS-7+
YSQ 55, 65, 75
Quattro Tech Md |
1.0" |
1.5" |
2.0" |
-
YS-6+ FW, YS-7+ FW, YSQ Fairway,
YSQ75 Fairway
|
Types |
Products |
Through-
Bore |
Blind-Bore |
Std-Bore |
| Fairway |
3-wood |
0.0" |
0.5" |
1.0" |
|
5-wood |
1.0" |
1.5" |
2.0" |
YS Hybrid+, YSQ Hybrid, TOUR AD
UT - 55, 65, 85, 95 Hybrid
|
Types |
Products |
Standard Bore |
| Hybrid |
YSQ Hybrid 85, YS Hybrid+
85
(5.0", 0.370" parallel tip) |
15°(deg) |
19° |
23° |
27° |
31+° |
YSQ Hybrid 85, YS Hybrid+
85
(0.355" taper tip, 41.0", 41.5", 42.0") |
0.0" |
0.5" |
1.0" |
1.5" |
2.0" |
There are currently no reviews of this
product.
Submit a Review